Collection: Picatinny Rails for Blaser

Picatinny rail for Blaser

The Blaser R93, introduced in 1993, and the R8, introduced in 2008, are both straight-pull rifles with a modular system where the caliber is changed by replacing the barrel and bolt. Blaser does not use the traditional Short Action/Long Action division – the length of the receiver is the same regardless of caliber. This is one of the reasons why Blaser is popular for driven and big game hunting in Scandinavia, where one rifle can be adapted for many purposes.

The selection here covers Blaser Standard clamp-on and Blaser Extended clamp-on. The clamp-on solution mounts around the exterior of the receiver and does not require drilling or threading in the metal – but it must fit correctly to the receiver's dimensions to provide a stable base.

Standard and Extended – what changes?

The difference between Standard and Extended is primarily about rail length. An Extended rail provides more space to position the optic further forward, which is relevant if you use scopes with long eye relief, or if you want more adjustment room. The Standard version is compact and suitable for most hunting setups.

Check that the clamping geometry on your Blaser matches the chosen rail. Clamp-on rails are specified with concrete hole distances, and these must match the receiver's dimensions. Confirm with the A/B/C control measurements.

Material and use scenario

The Blaser R8 is often used for active hunting, where the rifle is carried a lot. Here, a lightweight aluminum rail speaks for itself – it is sufficient for most hunting optic setups and keeps the weight down. Steel is relevant if the rifle is also used for target shooting or with heavy night optics that place greater demands on the rail's stiffness.

The Picatinny standard here is a practical advantage: it allows the use of the same type of mounts and rings across optic types, whether it's a traditional scope, a red dot sight, or a digital device. The material difference is further elaborated in the guide on steel vs. aluminum for Picatinny.

Night optics and thermal on Blaser

The Blaser R8's modular design makes the rifle suitable for setups that switch between optic types. Many digital and thermal devices can store zeroing profiles, so the same device can be moved between rifles without full re-zeroing. A Picatinny rail provides the common standard that makes this flexibility possible in practice.

Mounting

The clamp-on rail is fastened around the receiver with clamping screws. Check that contact surfaces are clean and use threadlocker on the clamping screws. The procedure for mounting Picatinny rails is described in the mounting guide.